3.14.2 Enable or Disable
SNMP
Agent
SNMP communication disabled by default on the QuickPanel+ device for security purposes. To enable or disable SNMP
communication using the QuickPanel
+
OS Utilities Settings tool refer to the procedure Enable or Disable
SNMP
Agent.
Note Enabling or disabling SNMP communication is a one-time user configuration.
3.14.3 Export MIB to SD Card
With the
SNMP
Agent is enabled on the QuickPanel
+
device, export the QuickPanel
+
Management Information Base (MIB)
QuickPanelMIB.mib file to a SD Card.
Attention
It is highly recommended that you pre-load GE MIBs (GEIP-SMI.txt and
GEIP-PRODUCTS-MIB.txt
in sequence) prior to loading the QuickPanelMIB.mib file
into SNMP Managers to avoid any MIB compiler errors.
Contact technical support or download the MIBs GEIP-SMI.txt and
GEIP-PRODUCTS-MIB.txt
from the Support Site and QuickPanelMIB.mib can be
copied from the QuickPanel
+
device by performing the following procedure.
➢ To export the MIB to a SD Card
1. Insert a working SD Card into the external card slot on the QuickPanel
+
device.
2. From the Start menu, select System, open the QuickPanel
+
Setup Tool, and select the
SNMP
Agent tab.
3. Copy the MIB file to the SD Card.
Click Copy MIB To SD Card.
To Next Page
Loading...
Need help?
General