GE Transport PT878 User Manual

Chapter 6. Programming Meter Settings
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual 123
6.8 Changing the Display Language (cont.)
The meter restarts in Operate Mode in the desired language. Figure 82
below illustrates a French version of the display shown in Figure 58 on
page 92.
Figure 82: French Version of Typical Display
Note: The PT878 defaults to US English. However, one or more alternate
languages can be installed at any time. Consult your GE
representative or www.gesensing.com for available languages.
6.9 Changing Communications Settings
On occasion, you might need to change the parameters by which the PT878
communicates with a PC over the wireless infrared interface. While
programming, see Figure 153 on page 237 of Appendix A, Menu Maps. To
check or change these parameters:
2000/11/30 09:53 AM
Gain, dB
-6
Delta-T, ns
-1.65
0.0
Volume, l/s
E2: Vitesse saine
5000
-5000
-1.5121
10 0.4
-30
3
ABC.SIT
Vitesse, m/s
Gain, dB

GE Transport PT878 Specifications

General

Brand	GE
Model	Transport PT878
Category	Measuring Instruments
Language	English