Chapter 7. Logging Data
140 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
7.3.2 Copying (Cloning) a Selected Log
In the Clone Selected Log option, you can copy the parameters of a
particular log, modify the parameters, and start the copy. To copy a log,
1. First, select the log you wish to copy in the Log Manager (shown in
Figure 89 on page 133).
2. Then open the File Menu, scroll to the Clone Selected Log option, and
press
[ENTER].
3. The Create New Log window (see Figure 91 on page 135) opens.
Follow the procedure discussed on page 135 to create a log name, and
press
[F3] (OK) to confirm the name.
4. The General Log Format window (shown in Figure 92 on page 136)
opens. Follow the procedure discussed on page 136 and page 137 to
change any settings.
Note: Unless otherwise specified, the cloned log always begins at the
current date and time, and ends after the period of time used by the
original log.
5. If you wish, scroll to the Measurements window (shown in Figure 93 on
page 138) and follow the procedure discussed on page 138 and
page 139 to modify any parameters.
6. When you have completed modifying the log parameters, press [F2]
(Cancel) to cancel the log or
[F3] (Activate) to confirm and start the new
log.
The PT878 returns to the Log Manager, which now displays the status of the
cloned log.
To Next Page
Loading...
Need help?
General
