GHL Doser 2.1 User Manual

GHL Doser Resource Guide
Release 07/2018
13
How to Connect via USB
When you connect your standalone GHL Doser to the PC for the first time, a driver will begin to
install itself. This driver is needed to connect to the GHL Doser 2. If the driver does not
automatically install itself or fails to install, please refer to the Troubleshooting pages.
1. Using the USB cable included in the box, connect it to the Doser 2 and PC.
2. Open GHL Control Center and select the correct “GHL Doser” on the lower left side of
the screen. If you do not see the correct “GHL Doser” listed, follow steps a-c before
proceeding.
a. Click on “Administrator”, a new window will pop up.
b. Click “New” and another window will pop up. Select the correct “GHL Doser” to
create a new connection.
c. Give this new connection a name and click “Save”

GHL Doser 2.1 Specifications

General

Brand	GHL
Model	Doser 2.1
Category	Water Pump
Language	English