BIOS Setup - 34 -
2-1 Startup Screen
The following startup Logo screen will appear when the computer boots.
Function Keys:
<TAB>: POST SCREEN
Press the <Tab> key to skip the startup Logo. To turn off the startup Logo, refer to the instructions on the
Full Screen LOGO Show item on page 51.
<DEL>: BIOS SETUP\Q-FLASH
Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
<F9>: SYSTEM INFORMATION
Press the <F9> key to display your system information.
<F12>: BOOT MENU
arrow key <h> or the down arrow key <i
The system will boot from the device immediately.
Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order
will still be based on BIOS Setup settings.
<END>: Q-FLASH
Function Keys