29
ENGLISH
PICTURE /SOUND SETTINGS
-----------------------------------------------------------
Sound settings
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »OK« to confirm.
3 Select menu item »Sound« with »
<
« or »
>
«
and press »
V
« to confirm.
– »Sound« menu is active.
Sound Mode User
Night Mode Off
Bluetooth Off
Select Bluetooth Device - - - -
Advanced
Restore Default Sound Settings
Picture
Tuesday
xx xxx xxxx
Source TimerSound NetworkTV Parental
Settings > Sound
Change Area ExitBack
BACK EXIT
Note:
7
Additional operations are explained in the
following sections.
Sound Mode
1 Select the line »Sound Mode« with »
V
« or
»
Λ
«.
2 Press »
<
« or »
>
« to select the desired op-
tion.
DTS TruSurround
DTS TruSurround is a patented audio technolo-
gy which is integrated into the television set and
only requires the built-in speakers to generate a
Surround Sound effect.
1 Select the line »Sound Mode« with »
V
« or
»
Λ
«.
2 Select the option »Movie«, »Natural«,
»Speech« or »Music« with »
<
« or »
>
«.
Switching bluetooth on / off and regis-
tering an external BT device
Bluetooth enables the television‘s audio signal
wireless to be sent to a registered BT device
(e.g. subwoofer).
The signal transmission is possible from the tele-
vision set to a Bluetooth-enabled device, only.
1 Switch on the appropriate subwoofer and
start the registration on the subwoofer (see
subwoofer operating manual).
2 Select the line »Bluetooth« with »
V
« or
»
Λ
« and switch on with »
<
« or »
>
« (»On«).
– The subwoofer is being searched for. After
a short time the subwoofer is displayed in
the menu.
3 When the subwoofer has been found con-
firm with »OK« .
– The name of the subwoofer is displayed in
the »Sound« menu.
Note:
7
To log out the subwoofer, select the
»Bluetooth device« item with »
V
« or »
Λ
«
and press »OK« to confirm. Log out the
subwoofer with »
« (red).
4 End settings with »EXIT«.
Location selection
The function how to place the television set is
important for the automatic audio settings.
1 Select the line »Advanced« from the Sound
menu with »
V
« or »
Λ
« and press »OK« to
confirm.
2 Select the line »TV Location« with »
V
« or
»
Λ
«.
3 Select the required option »Stand« or »Wall-
mounted« with »
<
« or »
>
«.
For DTS patents, see http://patents.dts.com. Manufac-
tured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are reg-
istered trademarks and DTS TruSurround is a trade-
mark of DTS, Inc.
©
DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manu-
factured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
To Next Page
Loading...
Need help?
General