ENGLISH
40
USB RECORDING
-------------------------------------------------------------------------------------------
Connecting external data media
Notes:
7
It is advised to put the television on stand-by
mode before connecting the Skype camera.
7
Before disconnecting the external data me-
dium, the television must first be switched to
standby, otherwise files can be damaged.
7
There are two USB inputs on the television,
namely USB(HDD) and USB1.
USB1(HDD) input is intended for USB
devices that require additional power (e.g.
external hard disk).
1 Plug the external hard disk to the
USB(HDD) USB interface of the television;
or
plug the memory stick in the USB1 socket
of the television.
Notes:
7
The socket USB1 of the television supports
500 mA current according to the USB
standard. Devices such as external hard
disk and etc. that consume more power can
only be connected to the USB(HDD) USB
interface of the television.
7
If you are using a power cable for the
external hard disk that you have connected
to the USB(HDD) USB interface, then the
power cable of the external hard disk must
also be unplugged when the TV is turned
off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device
is being read by the TV.
AV / S-VHS/COMPONENT
SERVICE
SATELLITE
13/18V
max. 500mA
ANT-IN
5V
max. 50mA
Optic Out USB(HDD)
HDMI3(ARC)
HDMI2
LAN
USB(HDD)
To Next Page
Loading...
Need help?
General