2. Turn Edit Knob A, B, or C Edit to modify a parameter setting.
When finished, store the changes to the program if you would like them to be recalled.
From the Program Edit Menus
1. While on the Program Screen, turn the Page/Select knob to highlight the effect
you want to edit.
2. Press the Page/Select knob. This will enter the Program Edit menus.
3. Once in the Program Edit menu, there can be two effects to edit, Effect 1 and Effect
2. Turn the Page/Select knob until the effect you want to edit is highlighted
(Edit Effect 1 menu is highlighted in our example).
4. Press the Page/Select knob to enter the Edit Effect menu.
5. Turn the Page/Select knob until the parameter(s) you want to edit appear in
the Main Display. Each parameter has either an A, B, or C labeled to the left of
its name indicating which Edit Knob will modify its value.
6. Turn Edit Knob A, B, or C associated with the parameter you would like to edit
to change its setting.
When finished, store the changes to the program if you would like them to be recalled.
chanGInG an effect
Each program offers a library of effects that can be used in the available effect mod-
ules. This allows you to customize a preset with the effects you need for your particular
application.
1. While on the Program Screen, press the Page/Select knob. This will enter the
Program Edit menus.
2. Turn the Page/Select knob until the Change Effect menu is highlighted.
Change Effect 2 is selected in our example.
3. Press the Page/Select knob to enter the Change Effect 2 menu.
4. Once in the change effect menu, turn the Page/Select knob to move through
the library of effects until you find the one you want to use. If you choose not to
select a new effect, press the Exit button to abort changing effects.
5. Press the Page/Select knob to load the newly selected effect into the effect loca-
tion. You will be able to hear the new effect in place in the effect routing at this
time.
Using the MX400
14
To Next Page
Loading...
Need help?
General
