Harman Lexicon MX400 User Manual

Using the MX400
16
Stereo anD DuaL Stereo confIGuratIonS
Effect 1/3
1. Dual Mono
Effect 2/4
L L
R R
Effect 1/3
Effect 2/4
L
R
L
R
2. Cascade
Effect 1/3
3. Parallel
Effect 2/4
L L
R
R
Effect 1/3
4. Mono Split
Effect 2/4
L
R
L
R
Effect 1/3
L
R
L
R
5. Stereo
1. Dual Mono
This routing option sends the Left and Right input signals through Effect 1/3 and
Effect 2/4 respectively. Each signal is then routed to its respective output, completely
independent from the other.
2. Cascade
Left and Right input signals are sent first through Effect 1/3, then through Effect 2/4,
then routed as a stereo signal to their respective outputs.
3. Parallel (Dual Stereo)
Left and Right input signals are sent through both effects independently. The output
signals of both Effects are then mixed together, and routed to both the outputs as a
single stereo signal.
4. Mono Split
Left input signal is sent through Effect 1/3, while the Right input signal is sent through
Effect 2/4. The output signals of both Effects are then mixed together, and routed to
both the outputs as a single stereo signal.
5. Stereo
Routing 5 provides a single stereo effect path for Left and Right signals. In the
Dual Stereo configuration, this routing utilizes all the DSP horsepower allocated
to the program, thus letting you use the expanded effects library used by the Stereo
Configuration programs. In Stereo programs, this routing removes one of the effect
modules allowing for users requiring a streamlined signal path with only a single
effect for their needs.

Harman Lexicon MX400 Specifications

General

Brand	Harman
Model	Lexicon MX400
Category	Recording Equipment
Language	English