Harman Lexicon MX400 User Manual

Using the MX400
17
SurrounD confIGuratIon
Surround
Reverb
L
R
L
R
1. Stereo In/Surround Out
(Front)
(Front)
L
R
(Rear)
Surround
Reverb
L
R
L
R
2. Surround In/Out
(Front)
(Front)
L
R
(Rear)
L
R
(Rear)
1. Stereo In/ Surround Out
This routing option takes a stereo source connected to the Left 1 and Right 1 (Front)
inputs, processes them through the Surround reverb, and sends it to all four outputs.
Note: Only a single mix control for the Left/Right front outputs is available with this
routing. The Left/Right rear outputs are always 100% wet processed.
2. Surround In/Out
This routing option takes a surround input source connected to all of the MX400
inputs, processes through the Surround reverb, and sends it to all four outputs.
eDItInG effect MIX/routInG
1. While on the Program Screen, press the Page/Select knob. This will enter the
Program Edit menus.
2. Turn the Page/Select knob until the Edit Mix/Routing menu is highlighted.
3. Press the Page/Select knob to enter the Edit Mix/Routing menu.
4. Turn Knob A to select different effect routings for the program. Use Knob B
and Knob C (when available) to adjust the wet/dry mix for each effect.
Note: In Surround Configuration programs using the Stereo In/Surround Out routing
(1) and in Stereo and Dual Stereo Configuration programs using the stereo routing
(5), there is only one effect available so Effect 2 Mix will not be available.
When finished, store the changes to the program if you would like them to be recalled.
MX400

Harman Lexicon MX400 Specifications

General

Brand	Harman
Model	Lexicon MX400
Category	Recording Equipment
Language	English