Hayward TriStar VS 900 Omni User Manual

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
27
Restore Defaults - this will return the data log settings to the factory default.
Set Level - you can change the amount of detail that is shown in the log file with this button.
You can also enable or disable data logging using the On/Off toggle.
Upgrade
Additional functions, features, and languages may be available for your VS Omni.
Determine if Firmware Upgrade is Available
The VS Omni’s firmware is the basic operating system that runs the unit. The VS Omni was
shipped with the version of firmware that was available at the time of release. There may be a
newer version available and if so, we encourage you to upgrade. Also, if you have experienced
problems, Hayward Technical Service may advise you to upgrade you VS Omni firmware. If this is
the case, follow the instructions on the following page.
1. Determine your current MSP firmware version.
2. Using an ordinary web browser, go to www.hayward.com/firmware and compare the latest
available version on the web to the current firmware version. If the firmware version on the
web is greater (number is larger) than your current version, upgrade your VS Omni. If not,
periodically check the website and upgrade as newer firmware is released.
favorites
heating
themes
º
F
air
71º F
82
cong
SYSTEM
conguration
1 / 2
cong wizard
system info
backup cong
restore cong
display
network
date/time
language
SYSTEM INFO
msp id: 31721
component HUA version
MSP
Variable Speed...
Variable Speed...
Smart Relay
Smart Relay
00-01-02-03-04
10-01-10-59-9c
10-01-10-00-01
90-31-03-42-41
90-31-03-42-3b
X.26.22.1-b0
R0.2.15
R0.2.10
X1.0.9
X1.0.9
Current Firmware Version
MSP ID Number

Hayward TriStar VS 900 Omni Specifications

General

Brand	Hayward
Model	TriStar VS 900 Omni
Category	Lighting Equipment
Language	English