select device
component HUA current version
MSP 05--- R1.3.0
Smart Relay 90-31-03-42-35 X1.0.12
COMPONENT
selection
Smart IO Board a0-41-03-41-28 X1.0.6
select device
component HUA current version
MSP 05--- R.1.3.0
COMPONENT
selection
Smart Relay 90-31-03-42-35 X1.0.12
Smart IO Board a0-41-03-41-28 X1.0.6
select device
component HUA current version
MSP 05--- R.1.3.0
COMPONENT
selection
Smart Relay 90-31-03-42-35 X1.0.12
Smart IO Board a0-41-03-41-28 X1.0.6
11. Touch Save to begin the upgrade. After the upgrade is finished, touch Save to restart.
12. After the VS Omni has restarted, exit Service Mode and resume operation.
Installing a New Language (must be in Service Mode, page 3)
1. Insert your USB thumb drive into your computer.
2. Go to www.hayward.com/firmware.
3. Click on the link to download the desired language and save to the USB thumb drive.
4. Remove the USB thumb drive from the computer
5. Locate the port on the underside of the VS Omni Wiring Hub and insert the thumb drive.
6. Apply power to the VS Omni (if not already powered) and allow the VS Omni to fully start.
7. Enter Service Mode (page 3).
8. Touch the Upgrade button.
9. Select “MSP” and touch the Save button.
To Next Page
Loading...
Need help?
General
