Hikmicro Falcon Series User Manual

Thermal Monocular User Manual
20
4 Measure Distance
The device can detect the distance between the target and the observation
position.
Before You Start
When measuring the distance, keep the hand and the position steady.
Otherwise, the accuracy may be affected.
Steps
1. Hold to show the menu.
2. Go to Advanced Settings, and
or
to select . Press
to enter the setting interface.
3. Press to show the setting interface and set a target.
1) Press or to select the target from Deer, Grey Wolf,
Brown Bear, and Custom
,
and press to confirm.
2) Press or to set target height.
Note
The available height ranges from 0.1 m to 9.0 m.
3) Hold to save the settings and return to the distance
measurement interface.
4. Align the center of top mark with the edge of target top, and press to
confirm.
5. Align the center of bottom mark with the edge of target bottom, and
press to confirm.
Result
The right top of the image displays the distance measurement result and
the height of the target.

Hikmicro Falcon Series Specifications

General

Brand	Hikmicro
Model	Falcon Series
Category	Monocular
Language	English