Hikmicro Falcon Series User Manual

Thermal Monocular User Manual
29
2. Go to Advanced Settings, and select General Settings.
3. Press or to select , and press to enter the
configuration interface.
4. Press or to select the language as required, and press to
confirm.
5. Hold to save settings and exit.
6.4 Set Unit
You can switch the unit for distance measurement.
Steps
1. Hold to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select , and press to enter the
configuration interface.
4. Press or to select the unit as required.
5. Hold to save settings and exit.
6.5 CVBS Output
The CVBS output is used to debug the device. You can also view the
device image on the display or handheld screen for details.
Before You Start
Connect the device and the display unit via a Type-C to CVBS cable.
Steps
1. Hold to show the menu.
2. Go to Advanced Settings, and select Function Settings.
3. Press or to select .
4. Press to enter the configuration interface.
5. Press or select Analog to turn on CVBS output.
6. Hold to save settings and exit.

Hikmicro Falcon Series Specifications

General

Brand	Hikmicro
Model	Falcon Series
Category	Monocular
Language	English