User Manual of Network Fisheye Camera
90
Figure 9-6 Alarm Input Settings
2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the alarm name (optional).
3. Check the checkbox of Enable Alarm Input Handling to enable the function.
4. Set the arming schedule. Refer to Task 2: Set Arming Schedule for Motion
Detection in Section 5.6.1.
5. Set the linkage method. Refer to Task 3: Set Linkage Method for Motion
Detection in Section 5.6.1.
6. (Optional) You can copy your settings to other alarm inputs.
7. Click Save to save the settings.
Note: Alarm input settings vary according to the camera model.
9.4 Configuring Alarm Output
Steps:
To Next Page
Loading...
Need help?
General
