HIKVISION DS-2CD63C5G0-IVS User Manual

User Manual of Network Fisheye Camera
3
 Refer to the Figure 2-2 to set network camera over the LAN via a switch or a
router.
Figure 2-1 Connecting Directly
Figure 2-2 Connecting via a Switch or a Router
2.1.2 Activating the Camera
You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software
are all supported.
 Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:
 The default IP address of the camera is 192.168.1.64.
 The computer and the camera should belong to the same subnet.
For the camera enables the DHCP by default, you need to use the SADP software to
search the IP address.

HIKVISION DS-2CD63C5G0-IVS Specifications

General

Brand	HIKVISION
Model	DS-2CD63C5G0-IVS
Category	Security Camera
Language	English