User Manual of Network Fisheye Camera
20
Note: Selectable stream types may be different between camera channels under
different display modes. Detailed information is shown in the following table.
Live View Window:
Display the live video on the display window of live view.
Toolbar:
Start/Stop the live view, enable/disable the two-way audio, adjust the audio volume,
capture pictures, record the video files, etc.
Note: Icons on tool bar are different under different decoding mode. Refer to Table
4-4 for detailed description.
PTZ Control:
Realize the pan/tilt/zoom function of PTZ view via the navigation box, and set the
PTZ moving speed.
Preset/Patrol Settings:
Set and call the preset/patrol for the camera.
4.2 Starting Live View
Starting live view under decoding modes of software and hardware is a bit different.
Software Decoding Mode:
You can click the icon / on the toolbar to start/stop all live view of the camera.
Hardware Decoding Mode:
Under hardware decoding mode, live video will be automatically displayed when you
click Live View on menu bar, click Hardware in display control area, change mount
type or display mode.
To Next Page
Loading...
Need help?
General
