User Manual of Network Fisheye Camera
74
Chapter 8 Configuring Image
Parameters
8.1 Configuring Display Settings
Purpose:
You can set the image quality of the camera, including brightness, contrast, saturation,
sharpness, etc.
Steps:
1. Enter the Display Settings interface:
Configuration > Image> Display Settings
2. Set the image parameters of the camera.
Note: In order to guarantee the image quality in the different illumination, it
provides two sets of parameters for user to configure.
Day/Night Auto-switch
Figure 8-1 Display Settings of Day/night Auto-switch
Image Adjustment
Brightness describes bright of the image, which ranges from 1 to 100, and
the default value is 50.
To Next Page
Loading...
Need help?
General
