EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2DE2A204IW-DE3

HIKVISION DS-2DE2A204IW-DE3 User Manual

HIKVISION DS-2DE2A204IW-DE3
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
Chapter 2 Device Acvaon and Accessing
To protect the security and privacy of the user account and data, you should set a login password
to
acvate the device when access the device via network.
Note
Refer to the user manual of the soware client for the detailed informaon about the client
soware acvaon.
2.1 Acvate Device
The device need to be acvated by seng a strong password before use. This part introduces
acvaon using dierent client tools.
2.1.1
Acvate Device via Web Browser
Use web browser to acvate the device. For the device with the DHCP enabled by default, use
SADP soware or PC client to acvate the device.
Before You Start
Make sure your device and your PC connect to the same LAN.
Steps
1.
Change the IP address of your PC to the same subnet as the device.
The default IP address of the device is 192.168.1.64.
2.
Open a web browser and input the default IP address.
3.
Create and
conrm the admin password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4.
Click OK to complete acvaon and enter Live View page.
5.
Modify IP address of the camera.
1) Enter IP address
modicaon page. Conguraon → Network → TCP/IP
2) Change IP address.
3) Save the
sengs.
Network Speed Dome User Manual
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2DE2A204IW-DE3 and is the answer not in the manual?

HIKVISION DS-2DE2A204IW-DE3 Specifications

General IconGeneral
Sensor typeCMOS
Progressive scanYes
Number of sensors1
Optical sensor size1/3 \
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Pan range0 - 330 °
Pan speed100 °/sec
White balanceATW, Auto, Manual
Tilt angle range0 - 90 °
Camera shutter speed1/1 - 1/30000 s
Minimum illumination0.005 lx
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
FocusMotorized/Manual
Digital zoom16 x
Optical zoom4 x
Focal length range- mm
Maximum aperture number2.7
Minimum aperture number1.6
Detection distance0.01 m
Audio input channels1 channels
Wi-Fi-
Number of users20 user(s)
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.1x
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, SDXC
DC output voltage12
Power source typeDC
Power consumption (typical)12 W
Operating temperature (T-T)-20 - 60 °C
IK codeIK10
Form factorDome
Product colorBlack, White
Housing materialAcrylonitrile butadiene styrene (ABS), Aluminium, Polycarbonate (PC)
International Protection (IP) codeIP66
Weight and Dimensions IconWeight and Dimensions
Width130.7 mm
Height101.7 mm
Weight (with stand)530 g

Related product manuals