EasyManuals Logo
Home>HIKVISION>Security Camera>DS-2DE2A204IW-DE3

HIKVISION DS-2DE2A204IW-DE3 User Manual

HIKVISION DS-2DE2A204IW-DE3
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
It shows the percentage of the remaining lifespan. The lifespan of a memory card may be
inuenced by factors such as its capacity and the bitrate. You need to change the memory
card if the remaining lifespan is not enough.
Health Status
It shows the condion of your memory card. There are three status descripons: good, bad,
and damaged. You will receive a nocaon if the health status is anything other than good
when the Arming Schedule and Linkage Method are set.
Note
It is recommended that you change the memory card when the health status is not "good".
3.
Click R/W Lock to set the permission of reading and wring to the memory card.
-
Add a Lock
a. Select the Lock Switch as ON.
b. Enter the password.
c. Click Save
-
Unlock
If you use the memory card on the device that locks it, unlocking will be done
automacally
and no unlocking procedures are required on the part of users.
If you use the memory card (with a lock) on a dierent device, you can go to HDD
Management to unlock the memory card manually. Select the memory card, and click
Unlock. Enter the correct password to unlock it.
-
Remove the Lock
a. Select the Lock Switch as OFF.
b. Enter the password in Password
Sengs.
c. Click Save.
Note
Only admin user can set the R/W Lock.
The memory card can only be read and wrien when it is unlocked.
If the device, which adds a lock to a memory card, is restored to the factory sengs, you can
go to HDD Management to unlock the memory card.
4.
Set Arming Schedule and Linkage Method. See Set Arming Schedule and Linkage Method
Sengs for details.
5.
Click Save.
6.1.2 Set FTP
You can congure the FTP server to save images which are captured by events or a med snapshot
task.
Before You Start
Get the FTP server address rst.
Network Speed Dome User Manual
37

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-2DE2A204IW-DE3 and is the answer not in the manual?

HIKVISION DS-2DE2A204IW-DE3 Specifications

General IconGeneral
Sensor typeCMOS
Progressive scanYes
Number of sensors1
Optical sensor size1/3 \
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Pan range0 - 330 °
Pan speed100 °/sec
White balanceATW, Auto, Manual
Tilt angle range0 - 90 °
Camera shutter speed1/1 - 1/30000 s
Minimum illumination0.005 lx
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired
FocusMotorized/Manual
Digital zoom16 x
Optical zoom4 x
Focal length range- mm
Maximum aperture number2.7
Minimum aperture number1.6
Detection distance0.01 m
Audio input channels1 channels
Wi-Fi-
Number of users20 user(s)
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.1x
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, SDXC
DC output voltage12
Power source typeDC
Power consumption (typical)12 W
Operating temperature (T-T)-20 - 60 °C
IK codeIK10
Form factorDome
Product colorBlack, White
Housing materialAcrylonitrile butadiene styrene (ABS), Aluminium, Polycarbonate (PC)
International Protection (IP) codeIP66
Weight and Dimensions IconWeight and Dimensions
Width130.7 mm
Height101.7 mm
Weight (with stand)530 g

Related product manuals