HIKVISION DS-2DP0818ZIX User Manual

User Manual of PanoVu Series Network Camera
61
Figure 5-4 Quota Settings
Note:
Up to 8 NAS disks can be connected to the camera.
5.1.3 Configuring Record Schedule
Before you start:
Make sure a local memory card is inserted in the camera or the network storage is added to the
camera.
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled recording. In this
section, you can follow the instructions to configure the scheduled recording. By default, the record
files of scheduled recording are stored in the memory card (if supported) or in the network disk.
Steps:
1. Enter the Record Schedule settings interface:
Configuration > Storage > Schedule Settings > Record Schedule
Figure 5-5 Record Schedule Interface
2. Check the Enable checkbox to enable scheduled recording.
3. To set the advanced settings of the camera, click to enter the advanced settings
interface.

HIKVISION DS-2DP0818ZIX Specifications

General

Brand	HIKVISION
Model	DS-2DP0818ZIX
Category	Security Camera
Language	English