10. Click to save the settings.
5.1.5 Cloud Storage
Purpose:
The captured pictures can be saved on an NVR which works in the Cloud Storage mode.
Note:
Cloud storage function varies according to different camera models.
Before you start:
Make sure the NVR has been switched into the Cloud Storage working mode, refer to the User Manual
of NVR for details.
Steps:
1. Check the checkbox of Enable Cloud Storage.
2. Input the IP address and port of the storage server.
3. Input the user name, password and confirm password for the authentication of the storage server.
4. Input picture storage pool ID on the server.
5. (Optional) You can click Test to test the cloud storage settings.
6. Click Save to save the settings.
Note:
The storage server port ranges from 2000 to 65535 and the picture storage pool ID ranges from 1 to
255.
5.2 Picture
Purpose:
This section explains how to view the captured picture files stored in the network disks and download
the captured pictures.
Steps:
1. Click on the menu bar to enter picture interface.
Figure 5-10 Picture Interface
2. Select the search conditions, including the picture type, start time, and end time, then click Search.
The results will be listed on the picture list area.
To Next Page
Loading...
Need help?
General
