HIKVISION DS-3E1526P-EI User Manual

Steps
1. Go to L2 Conguraon → Port Isolaon .
Figure 5-4
Congure Port Isolaon
2. Select the desired port(s) on the le port panel.
Note
You can also click or on the right to batch select
or deselect all ports.
3. Enable or disable Port Isolaon on the right as required.
4. Click Save.
5. Oponal: View the port isolaon statuses of dierent ports in
the Port Isolaon Status list.
5.1.5
Congure Port Mirroring
Port mirroring is a feature in network switches that allows
administrators to monitor trac on one port (mirrored port) and
replicate this data to another port (mirroring port) for analysis.
This replicaon occurs in real-me, allowing an administrator to
view a "mirror" or exact duplicate of the
trac moving on the
mirrored port.
Steps
1. Go to L2
Conguraon → Port Mirroring .
Figure 5-5
Congure Port Mirroring
2. Select the desired port(s) on the le port panel as the mirrored
ports, and
congure the parameters as required.
Note
You can also click or on the right to batch select
or deselect all ports.
Enable
Enable or disable port mirroring of the selected port(s).
Monitoring Port
11

HIKVISION DS-3E1526P-EI Specifications

General

Brand	HIKVISION
Model	DS-3E1526P-EI
Category	Switch
Language	English