User Manual of DS-7100HWI/HVI-SL Series DVR
109
Figure 9.3 Start Initialization
5. After the HDD has been initialized, the status of the HDD will change from Uninitialized to Normal.
Figure 9.4 HDD Status Changes to Normal
Note: Initializing the HDD will erase all data on it.
9.2 Configuring Quota Mode
Purpose
Each camera can be configured with allocated quota for the storage of recorded files.
Steps
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Quota.
Note: The device must be rebooted to activate the settings.
Figure 9.5 Storage Mode Settings Interface
3. Enter the storage capacity in the text field of Max. Record Capacity (GB).
To Next Page
Loading...
Need help?
General