HIKVISION DS-7116HGHI-F1 User Manual

Digital Video Recorder User Manual
197
Step 5 Click the Apply button to save the settings.
Step 6 After successful settings, the system asks you to reboot the device to enable the new
settings, and the PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status of
PPPoE connection.
12.2.2 Configuring Cloud P2P
Purpose
Cloud P2P provides the mobile phone application and as well the service platform page to access
and manage your connected DVR, which enables you to get a convenient remote access to the
surveillance system.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the Platform Access tab to enter the Cloud P2P Settings interface.
Step 3 Check the Enable checkbox to activate this feature.
Step 4 If required, select the checkbox of Custom and input the Server Address.
Step 5 To turn the Enable Stream Encryption on, you can select its checkbox.
Step 6 Enter the Verification Code of the device.
The verification code consists of 6 capital letters and is located at the bottom of the DVR. You can
also use the scanning tool of your phone to quickly get the code by scanning the QR code below.
Figure 12-3 Cloud P2P Settings Interface
Step 7 Click the Apply button to save and exit the interface.
After configuration, you can access and manage the DVR by your mobile phone on which
the Cloud P2P application is installed or by the website (dev.hicloudcam.com).

HIKVISION DS-7116HGHI-F1 Specifications

General

Bit rate	64 Kbit/s
Certification	CE
Product color	White
Channels quantity	16 channels
Maximum frame rate	30 fps
Audio output channels	2.0 channels
Audio formats supported	G.711 μ-law
Multi-display supported	Yes
Network connection type	RJ-45
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+
Playback resolutions supported	1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Audio input	1x RCA
BNC input ports	16
USB 2.0 ports quantity	2
Number of users	128 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
DC voltage	12 V
Power supply type	DC
Power consumption (typical)	20 W

Weight and Dimensions

Depth	210 mm
Width	285 mm
Height	45 mm
Weight	1200 g