Digital Video Recorder User Manual
71
Step 3 Select the IP camera from the list and click the button to add the camera (with the
same admin password of the DVR’s). Or you can click the One-touch Adding button to add
all cameras (with the same admin password) from the list.
Make sure the camera to add has already been actiavted by setting the admin password, and the
admin password of the camera is the same with the DVR’s.
Step 4 (Optional) For DS-7300/8100/9000HUHI-F/N series DVR, check the checkbox of Enable
H.265 (For Initial Access) for the connected IP camera supporting H.265. Then the IP camera
will be encoded with H.265.
Step 5 (For the encoders with multiple channels only) check the checkbox of Channel Port in the
pop-up window, as shown in the following figure, and click OK to add multiple channels.
Figure 2-40 Select Multiple Channels
OPTION 2:
Step 1 On the IP Camera Management interface, click the Custom Adding button to pop up the
Add IP Camera (Custom) interface.
Figure 2-41 Custom Adding IP Camera Interface
To Next Page
Loading...
Need help?
General
Weight and Dimensions
