User Manual of Digital Video Recorder
60
3.4 Adjusting Live View Settings
Purpose:
Live View settings can be customized according to different needs. You can configure the output interface,
dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps:
1.
Enter the Live View Settings interface.
Menu> Configuration> Live View
Figure 3. 8 Live View-General
The settings available in this menu include:
•
Video Output Interface: Designates the output to configure the settings for. The DS-7100, DS-7200,
and DS-7324/7332HGHI-SH provide HDMI/VGA outputs; DS-8124/8132HGHI-SH provides
HDMI1/VGA and HDMI2 outputs; DS-7308/7316HQHI-SH and DS-8108/8116HQHI-SH provide
HDMI, VGA and CVBS outputs; and other models provide HDMI/VGA and CVBS outputs for
selection.
The DS-7300-SH and DS-8100-SH provide the Channel-zero video output option for configuring the
parameters.
•
Live View Mode: Designates the display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch
in Live View.
•
Enable Audio Output: Enables/disables audio output for the selected camera in the live view mode.
•
Volume: Adjust the volume of the audio output.
•
Event Output: Designates the output to show event video; if available, you can select a different
video output interface from the Video Output Interface when an event occurs.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2.
Set the camera order.
1)
Select View tab.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
