User Manual of Digital Video Recorder
67
4.2 Setting PTZ Presets, Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.
4.2.1
Customizing Presets
Purpose:
Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes
place.
Steps:
1.
Enter the PTZ Control interface.
Menu>Camera>PTZ
Figure 4. 3 PTZ Settings
2.
Use the directional button to wheel the camera to the location where you want to set preset; and the zoom
and focus operations can be recorded in the preset as well.
3.
Enter the preset No. (1~255) in the preset text field, and click the
Set
button to link the location to the
preset.
Repeat the steps2-3 to save more presets.
You can click the
Clear
button to clear the location information of the preset, or click the
Clear All
button
to clear the location information of all the presets.
4.2.2
Calling Presets
Purpose:
This feature enables the camera to point to a specified position such as a window when an event takes place.
Steps:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
