User Manual of Digital Video Recorder
73
reboot to make settings take effect.
4.2.9
One-touch Park
Purpose:
For some certain model of the speed dome, it can be configured to start a predefined park action (scan, preset,
patrol and etc.) automatically after a period of inactivity (park time).
Steps:
1.
Click the button
PTZ
in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon in the quick setting bar to
enter the PTZ setting menu in live view mode.
2.
Click the button to show the one-touch function of the PTZ control.
Figure 4. 12 PTZ Panel - One-touch
3.
There are 3 one-touch park types selectable, click the corresponding button to activate the park action.
Park (Quick Patrol):
The dome starts patrol from the predefined preset 1 to preset 32 in order after the
park time. The undefined preset will be skipped.
Park (Patrol 1):
The dome starts move according to the predefined patrol 1 path after the park time.
Park (Preset 1):
The dome moves to the predefined preset 1 location after the park time.
The park time can only be set through the speed dome configuration interface, by default the value is
5s.
4.
Click the button again to inactivate it.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
