Network Video Recorder User Manual
92
Note
All IoT channels can be enabled/disabled with shortcuts.
1. Go to Maintenance → System Service → More Settings.
Click Time Sync Configuration, select Enable IoT Time Sync or Disable IoT Time Sync to
enable/disable scheduled time sync for all IoT channels.
Figure 7-2 IoT Time Sync
This function is only available for the admin user.
5. Click Add.
7.1.2 Add an Alarm Device
Add alarm devices of various manufacturers to receive alarms. You can configure linkage actions
like triggering recording and full screen monitoring, when an alarm occurs.
Before You Start
Install alarm devices. Ensure network communication between alarm devices and video recorder is
well.
Steps
1. Go to Business Application → IoT → Alarm → Device Management → Alarm Host.
2. Click Add.
To Next Page
Loading...
Need help?
General
