Network Video Recorder User Manual
77
detection alarm will be triggered.
7. Set the arming schedule. Refer to Configure Arming Schedule.
8. Set the linkage actions. Refer to Configure Linkage Actions.
9. Click Apply.
6.2.15 Parking Detection
Parking detection is used to detect parking violation in the area, applicable in expressway and one-
way street.
Steps
1. Go to Smart Analysis ā Smart Event Settings ā Other Events.
2. Select a camera.
3. Click Parking.
Figure 6-12 Parking Detection
4. Check Enable Parking Detection.
5. Optional: Check Save VCA Picture to save the captured parking detection pictures.
6. Set parking detection parameters.
1) Select Arming Area.
Note
Up to 4 areas are selectable.
2) Set Time Threshold.
To Next Page
Loading...
Need help?
General
