HIKVISION DS-K5032 Series User Manual

Note
The supported le size is less than 120 kb. The added picture will be cropped to 1280 × 800.
4.
Oponal: Tap Restore Default, the device will use the default picture for the screen saver.
5.
Oponal: Tap Add Again, you can select the picture again.
6.
Oponal: Tap on the upper le corner, you can exit the page.
7.4 Sta-Service Visitor System
7.4.1 View and Search Visitor Informaon
Aer the visitor is checked in, the administrator can view and search the visitor informaon.
View Visitor
Informaon
Tap Today's Visitor, Leave, or Not Checked Out to view the visitor number of today's, already
leaves, and not checked out. By default, it displays today's visitor informaon.
Tap at the upper right corner of the page to enter the visitor records page. Select Name, ID No.,
or Last Digits of Phone Number, enter key words in the search box, the list below will display the
search result.
Note
The phone last No. is the last 4 digits of the phone No.
Or tap at the upper right corner of the page. Filter the records according to the Visitor Status,
Vising Reason, or Vising Time. Tap to start ltering.
7.4.2 Login
Steps
1.
Tap in the top right corner of the home page. The login window will pop up.
2.
Enter the
acvaon password.
3.
Oponal: Tap to display the password.
4.
Tap OK to enter the
sengs page.
Note
5 failed aempts with incorrect password will lock the device for 30 minutes.
DS-K5032 Series Visitor Terminal User Manual
39

HIKVISION DS-K5032 Series Specifications

General

Brand	HIKVISION
Model	DS-K5032 Series
Category	Touch terminals
Language	English