HIKVISION DS-KD-KP User Manual

Note
Terminal NC1/COM is set as default for accessing magnec lock/
electric bolt; terminal NO2/COM is set as default for accessing
electric strike.
3.2.2 Door Contact Wiring
Figure 3-6 Door Contact Wiring
Note
AIN1 and AIN2 are defaulted to connect door contact. Door
contact connected to AIN1 detects status of the lock that
connected to NC1/NO1; Door contact connected to AIN2 detects
the status of the lock connected to NC2/NO2.
3.2.3 Exit Buon Wiring
Figure 3-7 Exit Buon Wiring
Note
AIN3 and AIN4 are set as default for connecng exit buon. Exit
buon connected to AIN3 opens the lock connected to NC1/NO1;
Exit buon connected to AIN4 controls the lock that connected to
NC2/NO2.
3.2.4 RS-485 Card Reader Wiring
To connect RS-485 card reader, refer to the picture below.
11

HIKVISION DS-KD-KP Specifications

General

IK code	IK07
Product type	Keypad
Mounting type	Surface
Product color	Black, Grey
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	529 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
Sustainability certificates	RoHS, WEEE, REACH
DC input voltage	12 V

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	265 g