HIKVISION DS-KD-KP User Manual

Figure 3-8 RS-485 Card Reader Wiring
4 Installaon
Note
●
Make sure the device in the package is in good condion and
all the assembly parts are included.
●
Sub module must work along with the main unit.
●
The PMR module is equipped with indicators so that it doesn't
have to be used with indicator sub module.
●
Set the sub module address before start the installaon steps.
●
Make sure the place for surface mounng is at.
●
Make sure all the related equipment is
power-o during the
installaon.
●
Tools that you need to prepare for installaon:
Drill (ø6), cross screwdriver (PH1*150 mm), and gradienter.
4.1 Congure Sub Module Address
You need to set the sub module address via DIP switch before
installaon.
Steps
1. Remove the rubber cover on the rear panel of the sub module
to expose the DIP switch.
Figure 4-1 DIP Switch
12

HIKVISION DS-KD-KP Specifications

General

IK code	IK07
Product type	Keypad
Mounting type	Surface
Product color	Black, Grey
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	529 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
Sustainability certificates	RoHS, WEEE, REACH
DC input voltage	12 V

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	265 g