HIKVISION DS-KD-KP User Manual

Click Refresh to get the present informaon.
Arming/Disarming Informaon
Click User Management → Arming/Disarming Informaon to
view the informaon. Click Refresh to get the present
informaon.
7.3.4 Network Sengs
TCP/IP Sengs
TCP/IP sengs must be properly congured before you operate
the device over network. The device supports IPv4.
Steps
1. Click Network → Basic
Sengs → TCP/IP to enter the sengs
page.
Figure 7-6 TCP/IP Sengs
2. Congure the network parameters.
-
Enable DHCP and the device will get the parameters
automacally.
-
Disable DHCP and set the IPv4 Address, IPv4 Subnet Mask
and IPv4 Default Gateway manually.
3. Congure the corresponding DNS server parameters.
4. Click Save to enable the sengs.
Port Sengs
Steps
1. Click Network → Basic Sengs → Port to enter the sengs
page.
61

HIKVISION DS-KD-KP Specifications

General

IK code	IK07
Product type	Keypad
Mounting type	Surface
Product color	Black, Grey
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	529 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
Sustainability certificates	RoHS, WEEE, REACH
DC input voltage	12 V

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	265 g