HIKVISION DS-KD-KP User Manual

Click Number Sengs to enter the page.
Figure 6-23 Number Sengs
Click Add, set the Room No. and SIP numbers in the pop-up
dialog box.
6.4.9 Access Control Sengs
Door Parameters
Set the parameters of the door which is linked to the device.
Steps
1. Click Access Control → Door Parameters to enter the sengs
page.
Figure 6-24 Door Parameters
2. Select Door No., and edit the Name.
3. Set Open Duraon. When the me to open over the open
duraon you set, the door will be locked again.
4. Select Relay Reverse as ON or Disable.
5. Click Save to enable the sengs.
Elevator Control
Before You Start
Make sure that the door staon is in the mode of main door
staon. Only the main door staon supports elevator control
funcon.
Steps
1. Click Access Control → Elevator Control Parameter to enter
the
sengs page.
53

HIKVISION DS-KD-KP Specifications

General

IK code	IK07
Product type	Keypad
Mounting type	Surface
Product color	Black, Grey
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	529 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
Sustainability certificates	RoHS, WEEE, REACH
DC input voltage	12 V

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	265 g