HIKVISION DS-KD-KP User Manual

Figure 4-41 Cave the Installaon Hole
2. Connect two gang boxes as below.
Figure 4-42 Connect Two Gang Boxes
3. Select a cable entry and remove the plasc sheet.
4. Remove the
plasc sheets on the side of the gang boxes
(shown as 1 and 2) below:
Figure 4-43 Remove the Plasc Sheets
5.
Mark the gang box screw holes on the wall.
1) Route the cables through the gang box hole.
2) Insert the gang box into the installaon hole.
3) Mark the gang box screw holes' posion with a marker, and
take out the gang box.
31

HIKVISION DS-KD-KP Specifications

General

IK code	IK07
Product type	Keypad
Mounting type	Surface
Product color	Black, Grey
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	529 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
Sustainability certificates	RoHS, WEEE, REACH
DC input voltage	12 V

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	265 g