Note
●
For main door staon (D series or V series), the serial No. is
0.
●
For sub door staon (D series or V series), the serial No.
cannot be 0. Serial No. ranges from 1 to 99.
●
For each villa or building, at least one main door staon (D
series or V series) should be
congured, and one sub door
staons (D series or V series) can be customized.
●
For one main door staon (D series or V series), up to 8 sub
door staons can be congured.
Linked Network Sengs
Steps
1. Click Intercom → Session
Sengs to enter the sengs page.
Figure 7-19 Session Sengs
2. Set Registraon Password.
3. Set Main Staon IP and Video Intercom Server IP.
4. Click to enable Protocol 1.0.
5. Click Save to enable the
sengs.
Time Parameters
Go to Intercom → Time Parameters to enter the page.
Congure Max. Call Duraon, Max. Message Duraon, Max.
Ring Duraon, and click Save.
Note
●
Max. call duraon between the module indoor staon and
client ranges from 90 s to 120 s. The call will end automacally
when the actual calling duraon is longer than the congured
one.
●
Max. message duraon ranges from 30 s to 60 s. The message
will end automacally when the actual message duraon is
longer than the congured one.
●
Max. ring duraon refers to the maximum duraon of the
module indoor
staon when it is called without being
accepted. Max. ring duraon ranges from 65 s to 255 s.
Ring-Back Tone Sengs
Click Intercom → Ringbacktone Sengs to enter the sengs
page.
Click Add to select the ring tone from PC.
Note
Available Audio Format: WAV、AAC, Size: Less than 600 KB,
Sample Rate: 8000Hz, Mono.
69