HIKVISION DS-KD-KP User Manual

Note
●
Make sure you have congured the room No. of the device.
●
Make sure you have add contacts to the device via iVMS-4200
Client Soware.
Call Resident via Main Module or Nametag
Module
Press the call buon on the main unit or on the nametag unit.
Call Resident via Keypad Module
Enter the Room No. on the keypad module, and press # to start
calling.
Note
You can press * via keypad module to hang up.
Call Resident via Display Module
Press on the display module to enter the contact list.
Figure 8-1 Contacts
Press or hold ˄/˅ to select a contact.
Press OK and conrm to call.
Note
●
Hold ˄ or ˅ to scroll the page up or down faster.
●
You can press Back buon via display module to hang up.
Call Resident via Touch-Display Module
You can call corresponding resident in the two ways. They are:
●
On the main page of the touch-display module, tap and
enter the No. to call.
78

HIKVISION DS-KD-KP Specifications

General

IK code	IK07
Product type	Keypad
Mounting type	Surface
Product color	Black, Grey
Brand compatibility	Hikvision
International Protection (IP) code	IP65
Package weight	529 g
Quantity per pack	1 pc(s)
Storage temperature (T-T)	10 - 95 °C
Operating temperature (T-T)	-40 - 55 °C
Sustainability certificates	RoHS, WEEE, REACH
DC input voltage	12 V

Weight and Dimensions

Depth	33.7 mm
Width	98.5 mm
Height	100 mm
Weight	265 g