Rail Network Video Recorder User Manual
20
2.3 Setting Admin Password
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No operation is allowed
before activation.
Steps:
1. Create the password by inputting the same password in the text field of New Password and Confirm.
Figure 2. 4 Settings Admin Password
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own
choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. And we recommend you reset your
password regularly, especially in the high security system, resetting the password monthly or weekly can
better protect your product.
2. Click OK to save the password and activate the device.
2.4 IP Camera Management
Purpose:
You need to activate IP cameras first and then add them.
Before you start:
Ensure the network communication between IP camera and Rail NVR is well.
Steps:
To enter IP Camera Settings interface through main menu, do following steps:
Enter the Local Network Settings interface.
Main Menu > Other Settings > IPC Settings
To enter IP Camera Settings interface through right-click menu, do following step:
Right click on Live View interface and click to select IPC Settings in right-click menu.
To Next Page
Need help?
General
