Rail Network Video Recorder User Manual
61
5. To delete the trusted IP address, you can select it on the white list and then click the Delete button.
Or you can also click the Clean All button to clear all the trusted IP address on the white list.
7.7 PTZ Settings
Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done
before you control the PTZ camera.
Before you start:
Connect the RS-485 cables of PTZ camera to EXT.DEV interface of the Rail NVR.
7.7.1 Configuring PTZ Parameters
Steps:
1. Enter the PTZ Settings interface.
Main Menu > Other Settings > PTZ
Figure 7. 25 PTZ Settings
2. Choose the camera for PTZ setting in the Camera drop-down list.
3. Set the parameters of the PTZ camera.
All the parameters should be exactly the same as the PTZ camera’s parameters.
4. Click OK button to save the settings.
7.7.2 PTZ Control Panel
Purpose:
If the connected camera is a speed dome, you can rotate it to desired view.
Step:
In live view interface, right click a speed dome and click PTZ on the right-click menu to enter the PTZ Control
panel.
To Next Page
Loading...
Need help?
General
