HIKVISION HWN-4108MH-8P User Manual

5.4 Device Management
5.4.1 Switch
Add and manage switches.
Quick Add Switch
Quick add switch(es) in the same network segment with the video recorder. If the switch is not
acvated, it will be added with the channel default password.
Steps
1.
Go to
Conguraon → Device Management → Switch.
2.
In the Online Device List, check the switch(es) to be added and click Add to add switch(es) in the
same network segment with the video recorder using the channel default password.
Add Switch Manually
Steps
1.
Go to
Conguraon → Device Management → Switch .
2.
In the Online Device List, click Add and set the parameters of the channel.
Table 5-1 Channel Parameter
Descripon
Parameter Descripon
IP Address The IP address of the switch.
Management Port It is recommended to keep the default conguraon.
User Name / Password The user name / password of the switch.
Use the Login Password Use the login password of the video recorder to add the switch.
3.
Click Add and Connue and repeat operaon unl all device have been added.
4.
Click Add.
5.4.2 Non-Video Event
Congure
non-video event.
Steps
1.
Go to Conguraon → Device Management → Non-Video Event.
2.
Select the device.
Network Video Recorder User Manual
34

HIKVISION HWN-4108MH-8P Specifications

General

Brand	HIKVISION
Model	HWN-4108MH-8P
Category	Network Hardware
Language	English