HIKVISION HWN-4108MH-8P User Manual

exclusively used by smartphone applicaons to view live video. Users with limited internet speeds
may benet most from this seng.
Steps
1.
Go to
Conguraon → Record → Parameter to congure camera main stream and sub-stream
parameters.
2.
Congure recording parameters.
Frame Rate
Frame rate refers to how many frames are captured each second. A higher frame rate is
advantageous when there is movement in the video stream, as it maintains image quality
throughout.
Resoluon
Image resoluon is a measure of how much detail a digital image can hold: the greater the
resoluon, the greater the level of detail. Resoluon can be specied as the number of pixel-
columns (width) by the number of pixel-rows (height), e.g.,1024×768.
Bitrate
The bit rate (in kbit/s or Mbit/s) is oen referred to as speed, but actually denes the number
of
bits/me unit and not distance/me unit.
Enable H.264+
The H.264+ mode helps to ensure the high video quality with a lowered bitrate. It can
eecvely reduce the need of bandwidth and HDD storage space.
Audio Source
The audio input signal source. If you select Audio Source as Camera Audio, it will transmit
audio via coaxial cable, and make the local audio input signal unavailable. Ensure the camera
supports to transmit audio via coaxial cable before
selecng Audio Source as Camera Audio.
Note
Audio Source is only available for certain models.
3.
Click Apply.
6.6.3 Storage Device
Inialize HDD
If it is the rst me you use your HDD, please inialize it aer it is installed.
Before You Start
Install at least an HDD to your video recorder.
Steps
1.
Go to Conguraon → Record → Storage .
Network Video Recorder User Manual
76

HIKVISION HWN-4108MH-8P Specifications

General

Brand	HIKVISION
Model	HWN-4108MH-8P
Category	Network Hardware
Language	English