HIKVISION HWN-4108MH-8P User Manual

Chapter 7 Maintenance
7.1 Restore Default
Steps
1.
Click at the upper-right corner.
2.
Select the restoring type.
Simple Restore
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the
factory default
sengs.
Factory Defaults
Restore all parameters to the factory default sengs.
Restore to Inacve
Restore the device to the inacve status, and leave all sengs unchanged except restoring
user accounts.
3.
Click Yes. The device will reboot
automacally.
7.2 Search Log
The operaon, alarm, excepon and informaon of video recorder can be stored in logs, which can
be viewed and exported at any me.
Steps
1.
Go to Maintenance → More .
2.
Set the search
condions.
3.
Click Search.
7.3 Advanced
Sengs
Steps
1.
Go to
Conguraon → Network → Advanced Sengs .
2.
Congure the parameters as your desire.
RTSP
You can
specically secure the stream data of live view by seng the RTSP authencaon.
RTSP Authencaon Type
Network Video Recorder User Manual
79

HIKVISION HWN-4108MH-8P Specifications

General

Brand	HIKVISION
Model	HWN-4108MH-8P
Category	Network Hardware
Language	English