Two authencaon types are selectable, if you select digest, only the request with digest
authencaon can access the video stream by the RTSP protocol via the IP address. For
security reasons, it is recommended to select digest as the authencaon type.
ISAPA
ISAPI (Internet Server Applicaon Programming Interface) is an open protocol based on HTTP,
which can realize the communicaon between the system devices (e.g., network camera,
NVR, etc.). The video recorder is as a server, the system can
nd and connect the video
recorder.
HTTP
The admin user account can disable the HTTP service from the GUI or the web browser. Aer
the HTTP is disabled, all the related services, including the ISAPI, Onvif and Gennetc, will
terminate as well.
HTTP Authencaon
If you need to enable the HTTP service, you can set the HTTP authencaon to enhance the
access security. Two authencaon types are selectable, for security reasons, it is
recommended to select digest as the
authencaon type.
IP Camera Occupaon Detecon
The funcon detects the network camera status. If the network camera has been added by
another video recorder, the network camera status will show as in Online Device list.
3.
Click Apply.
7.4 Buzzer Switch
You can enable or disable buzzer with alarm linkage or exceponal linkage.
Steps
1.
Click at the upper-right corner.
2.
Click More.
3.
Go to Buzzer Switch.
4.
Turn on or turn
o Enable.
7.5 Device Maintenance
7.5.1 Schedule Reboot
The device will automacally restart according to the schedule.
Steps
1.
Click at the upper-right corner.
2.
Click More.
Network Video Recorder User Manual
80