HIKVISION iVMS-4200 User Manual

Network Camera User Manual
40
6.2.2 Configuring Time Settings
Purpose:
You can follow the instructions in this section to configure the time synchronization
and DST settings.
Steps:
Enter the Time Settings interface,Configuration > Advanced Configuration>
System > Time Settings.
Figure 6-3 Time Settings
1. Select the Time Zone of your location from the drop-down menu.
2. Configure the NTP settings.
(1) Click to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
(3) (Optional) You can click the Test button to test the time synchronization
function via NTP server.

HIKVISION iVMS-4200 Specifications

General

Brand	HIKVISION
Model	iVMS-4200
Category	Security Camera
Language	English