Network Camera User Manual
67
Figure 8-2 Audio Settings
2. Configure the following settings.
Note: Audio settings vary according to different camera models.
Audio Encoding:G.711 ulaw, G.711alaw, G.726, MP2L2 and PCM are selectable.
For MP2L2, the Sampling Rate and Audio Stream Bitrate are configurable. For
PCM, the Sampling Rate can be set.
Audio Input: MicIn is selectable for the connected microphone and pickup
respectively.
Input Volume: 0-100 adjustable.
Environmental Noise Filter: Set it as OFF or ON. When the function is enabled,
the noise in the environment can be filtered to some extent.
3. Click Save to save the settings.
8.3 Configuring ROI Encoding
Purpose:
ROI (Region of Interest) encoding helps to discriminate the ROI and background
information in video compression, which means, the technology assigns more
encoding resource to the region of interest, thus to increase the quality of the ROI
whereas the background information is less focused.
Note: ROI function varies according to different camera models.
To Next Page
Loading...
Need help?
General
