HIKVISION iVMS-4200 User Manual

User Manual of Network Camera
46
Chapter 7
Network Settings
Purpose:
You can configure the parameters, including TCP/IP, Port,DDNS, PPPoE,
SNMP,QoS,FTP,Wi-Fi,Email,NAT,Platform Access,HTPPS etc., by following the
instructions in this section.
7.1 Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over
network. The camera supports both the IPv4 and IPv6. Both versions can be
configured simultaneously without conflicting to each other, and at least one IP
version should be configured.
Steps:
1. Enter TCP/IP Settings interface: Configuration > Advance Configuration >
Network > TCP/IP
Figure 7-1 TCP/IP Settings

HIKVISION iVMS-4200 Specifications

General

Brand	HIKVISION
Model	iVMS-4200
Category	Security Camera
Language	English