HIKVISION iVMS-4200 User Manual

Network Camera User Manual
88
Note: To send the Email when an event occurs, please refer to Section 7.2.3 to
complete Email setup in advance.
 Upload to FTP/Memory Card/NAS
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
Notes:
● Set the FTP address and the remote FTP server first. Refer to Section 7.2.2
Configuring FTP Settings for detailed information.
● Go to Configuration > Storage > Schedule Settings> Capture > Capture
Parameters page, enable the event-triggered snapshot, and set the capture
interval and capture number.
●
The captured image can also be uploaded to the available SD card or network
disk.
 Trigger Channel
The video will be recorded when the motion is detected. You have to set the
recording schedule to realize this function. Please refer to Section 11.1 for
detailed information.
 Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note: To trigger an alarm output when an event occurs, please refer to Section
10.1.4 Configuring Alarm Output to set the related parameters.
 Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on
each area for different day/night switch.

HIKVISION iVMS-4200 Specifications

General

Brand	HIKVISION
Model	iVMS-4200
Category	Security Camera
Language	English