Wireless Receiver Kit
A
)
6 After the panel is installed, remove the receiver panel, as shown in figure A, and then install the signal receiver.
)
7 Draw out the connecting cable from the corner pocket and connect the connecting cable and the wire of the receive kit.
After connecting the cable,wrap the connector with the cover and fix them with a band.
Air Panel
Receiver Kit
Corner Pocket
Connecting Cable
Connecting Cable
Band
Cover
Band
)
8 Fit the receiver corner into the corner box and press lightly.
Fixing Nail
(5 Portions)
ＨＹＲＥ－Ｔ０１Ｈ
3. Optional Functions
、
ＨＹＲＥ－Ｔ０２Ｈ
To Next Page
Loading...
Need help?
General
